Spray Bake Painting Booth

Product Detail

Spray Booth:	6.9x3.9x2.65m	Control Panel:	Schneider Components
Fan:	Turbo Fan	Lighting:	LED
Exhaust Filter:	Water Curtain In Spray Booth	Usage:	Woodworking, Industrial

6.9M Water Curtain Paint Spray Booth, Commercial Paint Booth In Garage

Features

1, Turbo fan for intake and extraction.

2. All panels are tongue and groove interlock structure.

3, #304 stainless steel heat exchanger.

4, All LED lights, energy save and more illumination.

5, Color white, blue, orange and red is optional.

6, OEM available.

Advantage:

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean, symmetrical and steady-going down airflow for spraying, In the painting room, water curtain for suction. After painting, inside the drying oven, hot air goes from heating generators to plenum, then enters room after filtered by ceiling filter, hot air circulation providing heat that is necessary for baking of cars surface.

Spray booth specification:

Item	Detailed Specification
Inside dimension	6900×3900×2650 mm (L×W×H)
Outside dimension	7000×6600×3400 mm (L×W×H)
Front door	Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, colour: Blue
Emergency door	1 units, 800×2000mm (W×H), colour: white, aluminium alloy window frame
Basement	Galvanized steel assemble, 300mm high, quadrate steel support, 2 rows grilles made by flat bar and twisted steel, galvanized. 3 rows of indented plates, 2 ramps, 750×2000mm/pc.
Wall panel	Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with 50mm thick EPS inside, colour: white.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×36W, side Lights: 8Units×2Pcs=16Pcs×36W, with LED, horizontally set, lighting boxes are powered coated.
Generator cabinet	Inlet from side upper, outlet from back upper, galvanized steel frame; white coated steel outside, galvanized steel inside, filled with heat preservation material in the middle.
Intake and Exhaust system	Inlet: 1×7.5KW turbo fan, power: 7.5KW, air capacity: 25000m3/h.
	Outlet: with water curtain exhaust system.
Heating system	RIELLO G20 diesel burner, stainless steel heat exchanger, Max. heating productivity: 200000kcal/h, maximum temperature: 80 degree.
Purification system	Pre-filter, ceiling filter, fibreglass filter, water curtain filter.
Roof	Galvanized steel
Control system	Spraying, lighting switch, power supply switch, emergency stop, hour meter.
Total power	9.5KW (Power supply 3*380V, 50HZ)

Drying oven specification:

Item	Detailed Specification
Inside dimension	4000×3900×2650 mm (L×W×H)
Outside dimension	4100×5350×3400 mm (L×W×H)
Front door (2 sets)	Folding door, 3folds, 3000×2600 mm (W×H), one on the front side (share with the spray booth, as the lighting box, the height less than 2.6m a little), another one on the back side, without frame, aluminium alloy window frame, colour: Blue
Emergency door	1 units, 800×2000mm (W×H), colour: white, aluminium alloy window frame
Basement	Galvanized steel assemble, 300mm high, quadrate steel support, 2 rows grilles made by flat bar and twisted steel, galvanized. 3 rows of indented plates, 2 ramps, 750×2000mm/pc.
Wall panel	Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with 50mm thick EPS inside, colour: white.
Light	Ceiling Lights: 6Units×4Pcs=24Pcs×36W, no side lights, with LED, lighting boxes are powered coated.
Generator cabinet	Inlet from side upper, galvanized steel frame; white coated steel outside, galvanized steel inside, filled with heat preservation material in the middle.
Intake and Exhaust system	Inlet: 1×5.5KW turbo fan, power: 5.5KW, air capacity: 18000m3/h.
	Outlet: without
Heating system	RIELLO G20 diesel burner, stainless steel heat exchanger, Max. heating productivity: 200000kcal/h, maximum temperature: 80 degree
Purification system	Pre-filter, ceiling filter, fibreglass filter.
Roof	Galvanized steel
Control system	Baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, hour meter, temperature limit controller.
Total power	6.5KW (Power supply 3*380V, 50HZ)