Side Draft Paint Booth

Product Detail

Heating:	4 Sets Infrared Ramp With Rail	Temperature:	Separate Control
Intake Motor:	Turbo Fan	Illumination:	LED Lights
Wall:	Rock Wool	Air Flow:	Converter Control

Infrared Heating Garage Spray Booth Pressure Protect Device Converter Adjustment

Features

1. Infrared spray booth , environmental and efficient.

2. All panels tongue and groove interlock structure

3. 4 units short wave infrared lamps with rail for heating

4. Quality brand-name turbo fans

5. LED Industry-leading light levels

6. With pressure protect device.

7. With inverter to control the air flow.

8. Schneider electric components.

Advantage

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,

symmetrical and steady-going down airflow for spraying, at the same time the inverter adjust air flow to adjust the pressure inside paint booth. After painting, the infrared heating separate control to dry the item, until the temperature up to setting valve. Afterwards, the air with little benzene will be released to the atmosphere after being filtered by the air filter.

Item	Detailed Specification
Inside dimension	6900×3900×2650 mm (L×W×H)
Outside dimension	7000×5450×3400mm (L×W×H)
Front door	Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, orange colour, door head and two batten on both sides white colour.
Personal door	1 units, 800×2000mm (W×H), colour: white.
Basement	Galvanized steel assemble, 300mm high, quadrate steel support, adjustable type, full grilles made by flat bar and twisted steel, galvanized, 3 ramps, 900×2000mm/pc, silver colour.
Room body	Thickness: 50mm, width:1150mm, tongue and groove structure, 0.476mm colour steel with rock wool inside, colour: white, bulge structure.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×16W, side lights: 8Units×4Pcs=32Pcs×7W, with LED, lighting boxes are powered coated, illumination =1500LUX
Generator cabinet	Intake from back upper, exhaust from rear upper, aluminum alloy frame; orange machine-made panel covered, filled with heat preservation material inside.
Intake and Exhaust system	Inlet:1×7.5KW turbo fan, air capacity for each fan: 25000m3/h.
	Outlet: 1×7.5KW turbo fan, air capacity for each fan: 25000m3/h. Manual damper, 5m ducts, 1 pcs 900 bend, 1 pcs 300 bend, 1 pcs intake hoop.
Heating system	Infrared heating.
Purification system	Pre-filter (pocket type), ceiling filter, fibreglass filter, activated carbon filter (pocket type)
Roof	Galvanized steel
Control system	Spraying, baking, lighting switch, thermostat, power supply switch, emergency stop, pressure gauge, all motors is normal start, with pressure protect device and inverter.
Total power	18.5KW (Power supply 1×220V, 3×380V, 50HZ)