Aircraft Paint Booth

Product Detail

Internal Size:	14×12×6.35m (L×W×H)	Control Box:	Schneider Components
Lights:	LED	Main Door:	Folding Type, With Hanger Rail
Exhaust:	From The Pit In The Ground	Usage:	Air Craft

Folding Main Door LED Light Aircraft Spray Booth , Industrial Paint Systems

Features

1, Centrifugal fan for intake and extraction.

2. All panels are tongue and groove interlock structure.

3, #304 stainless steel heat exchanger.

4, All LED lights, energy save and more illumination.

5, Color white, blue, orange and red is optional.

6, OEM available.

Advantage:

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean, symmetrical and steady-going down airflow for spraying. After painting, inside the drying oven, hot air goes from heating generators to plenum, then enters room after filtered by ceiling filter, hot air circulation providing heat that is necessary for baking of air craft surface. .

Spray booth specification:

Item	Detailed Specification
Inside dimension	14000×12000×6350 mm (L×W×H)
Outside dimension	14150×13920×7030 mm (L×W×H)
Front door	Folding door, 1 set, 12 folds, door size: 10200×6000 mm (W×H), square tube frame, colour: white
Emergency door	2 units, 800×2000mm (W×H), colour: white.
Basement	Without, exhaust from both 4 lines pits under ground, each line 11500×760mm(L×W), with grilles above.
Wall panel	Thickness: 70mm, width:1150mm, tongue and groove structure, 0.476mm colour steel with 70mm thick EPS inside, EPS/14kg/m³, colour: white.
Light	Ceiling Lights: 24Units×4Pcs=96Pcs×36W, side Lights: 26Units×2Pcs=52Pcs×36W, up and down setting, with LED, lighting boxes are powered coated.
Generator cabinet	Inlet from side upper, outlet from back upper, square tube frame; white coated steel outside, galvanized steel inside, filled with heat preservation material in the middle.
Intake and Exhaust system	Inlet: 6×5.5KW centrifugal fan, power: 5.5KW for each, air capacity: 90000m3/h.
	Outlet: 3×11KW centrifugal fan, belt drive, power: 11KW for each, air capacity: 90000m3/h. with manual damper, 12pcs ducts, 6pcs 90 degree bend, 3pcs 30 degree bend.
Heating system	RIELLO G20 diesel burner, stainless steel heat exchanger, pneumatic damper for spraying cucle, Max. heating productivity: 200000kcal/h for each set, maximum temperature: 80 degree, total 12pcs chimney, 3pcs bend.
Purification system	Pre-filter, ceiling filter, fibreglass filter, carbon filter.
Roof	50mm EPS panel.
Control system	Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, temperature controller, power supply switch, emergency stop, hour meter, temperature controller, schneider components.
Total power	72KW (Power supply 3*380V, 50HZ)